Combined strapping tool for steel strap

Minimal effort for high-performance strap
The HKE-HD is a special tool for using straps with a width of 19 mm and thickness from 0.6 to 0.8 mm.
Processing such straps requires of course a little more effort than processing standard straps. The HKE-HD has a more voluminous body than its little brother, the HKE-L, to master the heavier loads with even more confidence. The longer levers make the job easier.
Apart from that, the typical HKE advantages are retained in the HD version: the TITAN-typical sealless joint with three notches is particularly suitable for flat packages.
Further advantages are the minimal risk of injury from this joint and the use of the HKE-HD in mobile applications. The HKE-HD is flexible enough for use in mobile applications.

Technical Data
Kind of drive (tensioning) Manually
Tension force up to approx. 6,000 N
Kind of drive (sealing) Manually
Dimensions 570 x 130 x 190 mm (L x W x H)

22.4 x 5.1 x 7.5" (L x W x H)
Weight 4.2 kg
9.3 lb
Strap/Joint
Type of strap Steel strap
Strap Automatenband
up to approx. 900 N/mm²
tensile strength
MEGABAND®
up to approx. 1.100 N/mm²
tensile strength
Strap width 19 mm
3/4"
Strap thickness 0,60 - 0,80 mm
0.024 - 0.031"
Kind of seal Sealless-joint
Sealing strength
(depending on strap quality, strap dimensions)
to approx. 75% of the strap breaking load
Minimum bearing area
Flat package 150 mm
5.9"
Application
Strapping of flat packages (e.g. palletized goods) for mobile use.